Walk-in closet Part 2

I finished one side of the walk in closet today!  There is one shelf for each side down in the basement, but I don’t think we will need them.  I got a really good deal on the birch cabinet grade plywood at Home Depot.  I used birch veneer banding and a light walnut oil stain from Varathane.  After that was the water based urethane from Minwax in a gloss finish.

I used no glue instead opting for pocket hole joinery.  Basically, you drill a hole with a special jig set to a certain depth in the angled template(the blue thing) that is clamped down down to the wood.  You can then screw two pieces of wood together and hide the screws.  You are making a pocket for the screw to slip into.  Here I am drilling some holes.

Allright time for, as HGTV would call it,”THE GRAND REVEAL!”
up the stairs…

into the hallway…

I see shelving…

a lot of shelving!

even a special spot designed for Moxie’s litter pod!

time to get some hangers…

hmmmm now what about that other side

Allright I have to start making Giada’s lasagna now. 

This entry was posted on 6. March 2009 at 18:07 and is filed under Closet room. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response or trackback from your own site.